Avangard 24 is a new concept of a cast iron heat storage sauna stove with direct charge heating. The casing is modular, assembly takes place from the bottom up, the modules are connected according to the tongue-and-groove system.

The weight of the steam evaporator in the Avangrad oven is 24 - 56 kg, and it is heated by direct contact with the flame. The steam evaporator has 2 surfaces with an increased working area - from below it is heated by fire, and water is supplied from above for steam. To increase the evaporation area and heat the first layers of stones, high spikes are cast on the stove.

A flame divider is installed under the stove on 3 stops, it divides the flame into 3 streams and directs first to the side parts of the body for intensive heating of the walls and convection heating of air in the steam room. For this, convection ribs are located on the outer surfaces. Further, the flame passes through the ledges to the exit to the chimney, heating the stove.

The heater allows you to install various Hephaestus starter modules together with a slide block.

The kit includes:

Sauna stove Avangard 24

Starting nozzle

Ash box stainless steel

Mesh "Tulip"

Sealant "Titan" up to 1500С-1 pc.

Warranty certificate (operation manual)

Technical details:

Steam room volume, m3 - 24

Equipment - in the grid

Type of fuel - firewood

Material - cast iron

Steam room mode - Russian sauna

Removal of the portal, mm - 230

Chimney diameter, mm - 112

Firewood length, cm - 50

Mesh dimensions, (LxWxH) mm - 665х600х700

Tunnel material - cast iron