MMotors fan with bearings MM-S 100 for sauna, steam baths without timer. For sauna, steam baths.

Attaches to round ventilation ducts with a diameter of 100 mm.

Equipped with a quiet electric motor with double ball bearings, manufactured by the Japanese company NSK, which ensures a low noise level and guarantees 30,000 operating hours.

These bearings are used when high speed and low power loss are required due to low resistance.

Waterproof housing, the impeller is made of high quality plastic, which allows you to mount the fan directly inside and maintain all properties at temperatures up to + 140 ° С.

The degree of protection of the IP X4 motor allows the fans to work in high humidity and hostile environments.

If the fan is connected to the light switch, it will run until the light switch is turned on. It can also be turned on with a separate switch.

Fan operating temperature up to +140 C.

Voltage: 220-240V, 50 Hz

Type: fitting

Depth (closing): 60 mmDiameter: 100 mm

Extraction capacity: 105 m3 / h

IP class: IPX4

Check valve: Not available

Operating temperature: + 140C

Power: 17 W

Timer: None

Humidifier: None

LED backlight: Not available

Engine RPM: 2750 rpm

Noise level: 40 dB

Warranty: 3 years

Manufacturer: MMotors JSC (Bulgaria)