Ceresit CT84 Express PU adhesive

CT 84 Express PU adhesive for EPS-boards Application from 0°C and at high humidity. Especially recommended for work in low temperature when cement adhesives drying time is

significantly longer.

Packaging: Metal container of 850 ml

Temperature of application: from +0 °C to +40 °C

Surface drying time: approx. 10 min.

Hardering time: approx. 2 hours

Thermal conductivity ratio: – 0.040 W/mk

Assumed consumption: approx. 10 m2

Storage: Ceresit CT 84 should be stored and transported vertically, in cool and dry conditions and in the temperature above 0 °C.

Properties

Yield: 10 m² - 100 % higher than traditional cement adhesives

15 % higher adhesive strength than traditional cement adhesives

Low expansion Anchoring after aprox. 2 h – speeding up thermal insulation work; in case of application of CT 84 and Ceresit Ceretherm systems, insulation works can take even 5 days less

Application from 0°C and high humidity of air especially recommended for work in low temperature when cement adhesives drying time is signifi cantly longer

Perfect for ”ETICS on ETICS” application– fixing of 1 m2 of eps boards with CT 84 weights 100 g vs 5 kg in case of cement adhesive

Enhanced thermal insulation properties – CT 84, unlike traditional cement adhesives, has thermal insulation properties similar to foamed polystyrene or mineral wool

High homogeneity of adhesive thanks to metal ball to protecting against too large air bubbles

Description

Ceresit CT 84 polyurethane adhesive is used for fixing expanded polystyrene boards in the complex Ceresit Ceretherm systems for thermal insulation for external building walls (ETICS). Approximately 2 hours after the application, the foamed polystyrene boards may be smoothed, anchored and, then the armoured layer may be applied using the Ceresit CT 85, CT 87. CT 84 polyurethane adhesive is also used for fixing such materials as EPS and XPS foamed polystyrene for such surfaces as wood, OSB boards, glass, bitumens, ceramic bricks, concrete, coated and galvanised sheet plate, dry cellular concrete and after water impact, drywall, and for layered fixing of expanded polystyrene boards under conditions of normal and lower temperatures, also in thermal systems.

This product possesses documents of reference:

- BBA Certifi cate No. 14/5142

- Irish Agrement Board Certifi cate No. 09/0340