The Mondex Teno E is a wall-mounted sauna stove that heats up quickly and features an external control unit. Thanks to the unique spiral resistors, the Teno E warms up very quickly.  The heat can be adjusted from soft to intense by pouring water on the side or the top of the stove.

Thanks to electronic controls, the stove can be flush-mounted to the bench structure, making its already small footprint even smaller.

The Teno E has an external control unit that can be installed in the sauna, the changing room or even into a light switch socket. The small, low-profile temperature sensor measures the temperature on the bench wall, ensuring just the right temperature every time you use your sauna.

Benefits:

The steel case with apertures gives heat also to the lower parts of the sauna.

Spiral resistors maximise the heating surface and improve the sauna’s overall energy efficiency.

The wall mounting plate supplied with the stove makes wall installation without any additional support structures a snap.

Control unit cable length is 10 metres; temperature sensor cable length is 4 metres.

Electric heater technical details:

Product code - 36902

Output, kW - 9,0

Sauna room min - max size, m3 - 8-13

Measurements (HxWxD),mm - 630 / 410 / 290

Weight, kg - 10

Stone capacity max, kg - 50

Minimum safety distances (ceiling / sides) - 950 / 100

Supply voltage, phase - 400 V 3N~

Fuse A - 3 x 16

Connection cable, mm2 - 5 x 2,5

Control unit - Equipped

Water tank capacity, l - 0

Stones are not included