Harvia Cilindro electric heater's massive sauna stone amount provides enjoyable sauna bath. The quality-price relation of this floor mounted heater is excellent.

Cilindro has an apertured outer casing made of stainless steel. You can adjust the nature of the heat from soft to sharp by throwing water either to the side of the heater or straight on top of the stone pillar. Cilindro H has a partially apertured outer casing in the front, which offers the sauna bather the benefits of a large stone amount, but also enables the heater to be located in smaller space. Cilindro F has a solid outer casing. The casing decreases the safety distance requirements, and therefore the heater’s space requirement is small and benches can be located near to it. This gives more freedom for creativity in sauna design. Cilindro F offers sharper sauna bath compared to the softer sauna bath provided by the other two Cilindro models. In Cilindro H and Cilindro F the stone space is made of stainless steel and outer casing is made of black painted, zinked steel. The heaters are equipped with a built-in control unit and the operating switches are placed down on the heater’s front side. The Cilindro models PC70E and PC90E are controlled by a separate control unit (for example Griffin or C150). The E-model heater can be embedded into the lower bench with the help of an embedding flange (PC1) made of stainless steel.

Suitable control units:

HARVIA C170VKK (2,3-17kW)

HARVIA CS110 (2,3-9kW)

HARVIA CS170 (2,3-17kW)

HARVIA C150 (2,3-17kW)

HARVIA CX110 (2,3-11kW)

HARVIA CX170 (2,3-17kW)

HARVIA CF9 (2,3-9kW)

Technical details: 

Output, kW - 6.8

Sauna room min, m3 - 6

Sauna room max, m3 - 10

Dimensions width, mm - 320

Dimensions height, mm - 930

Dimensions depth, mm - 320

Weight, kg - 10 

Stone capacity max, kg - 90

Sauna room height min, cm - 190

Supply voltage, phase - 400V 3N; 230V 1N

Connection cable, mm2 - 5 x 2,5 / 3 x 10

Fuse A 3 x 16 / 1 x 40

Stones not included.