Sauna stove-mesh for steam rooms from 10 to 18 cubic meters. The volume of the open heater can hold up to 160 kg of stones.

Features and benefits:

"Sahara" is a super-fast powerful oven for those who like to experiment with different modes in the steam room:

• In the intensive burning mode, the stove can warm up the steam room to 110 ° C in 30–50 minutes. By putting water on hot stones, you can create in the steam room a very tough microclimate that will appeal to "seasoned steelworkers".

Microclimate of the “Russian bath”

With a moderate firebox, the stove is able to create a microclimate in a steam room, similar in sensations to a Russian bath: temperature up to 90 ° C in combination with light steam from stones of a two-section heater heated to 500 ° C.

Sahara with a steam generator is an ideal solution for experiments in a steam room. In addition to the steam received from the stones, you can remove steam from the walls of high-speed steam generators.

Sahara sauna stove 16 LKP is suitable for steam rooms of 8 to 16 m3 in size.

Features:

The body has no sharp corners and harmoniously fits into the interior of any bath.

The central location of the chimney - for ease of installation.

Warming up from 5 sides (stones up to 500 ° С).

The heater is equipped with openings for cleaning soot from the smoke box.

ATTENTION! Chimney elements and stones are not included in the stove kit and must be purchased separately.

L - Stove is made of high-alloy steel with a chromium content of up to 13%. Thermally loaded elements of stoves for a bath are made of steel with a chromium content of up to 17%. The casing-convector of the stove is painted with heat-resistant enamel.

R - stoves are equipped with a built-in register heat exchanger for connecting to a remote tank for remote heating of water.

K - stove cover-convector combined - it combines elements painted with heat-resistant enamel and elements made of mirror stainless steel.