The stove for a sauna is suitable for steam rooms from 14 to 24 m3. Built-in steam generator. Stove is made of 4 mm stainless steel.

Features and benefits:

"Sahara" is a super-fast powerful oven for those who like to experiment with different modes in the steam room:

• In the intensive burning mode, the stove can warm up the steam room to 110 ° C in 30–50 minutes. By putting water on hot stones, you can create in the steam room a very tough microclimate that will appeal to "seasoned steelworkers".

• With a moderate firebox, the stove is able to create in a steam microclimate, close in sensation to the Russian bath: temperature up to 90 ° C in combination with light steam from stones of two-section heater heated to 500 ° C.

Sahara bath stove 24 LNZP Profi is suitable for steam rooms of 14 to 24 m3.

Sahara with steam generator is an ideal solution for steam room experiments. In addition to steam obtained from stones, steam can be removed from the walls of high-speed steam generators.

Features:

The body has no sharp corners and harmoniously fits into the interior of any bath.

The central location of the chimney - for ease of installation.

Warming up from 5 sides (stones up to 500 ° С).

The heater is equipped with openings for cleaning soot from the smoke box.

ATTENTION! Chimney elements and stones are not included in the stove kit and must be purchased separately.

L - Stove is made of high-alloy steel with a chromium content of up to 13%. Thermally loaded elements of stoves for a bath are made of steel with a chromium content of up to 17%. The casing-convector of the stove is painted with heat-resistant enamel.

NZ - the convector of stove is made of mirror stainless steel.

P - Stove are equipped with a built-in steam generator (patent № 2352865) to obtain steam from the heated walls of the stove.

PROFI - stove is made of 4 mm stainless steel with a chromium content of at least 17%.